Air filtration safeguards

Landini Rex 4 tractor in the field.

A new upgrade for the tractor cab air filtration system on Landini Rex 4 tractors provides top level Category 4 protection against spray contaminants and easy change-over between regular and carbon filters.

New Rex 4 tractors with the optional CAT4 cab have both types of filters installed at the same time and operators can select either type with the flick of a switch.

This arrangement provides quick and convenient access to the maximum level of protection from potential contaminants in the cab while spraying but also optimises the service life of the special carbon filter. This is a pragmatic solution typical of the innovative thinking that goes into Landini products by engineers at Argo Tractors,” says Gayne Carroll AGTEK, Distributor for Argo Tractors in NZ managing director.

“It simplifies things for the operator while also cutting filter replacement costs to a minimum.”

The new Landini Rex 4 tractors come in a number of width and wheelbase configurations, primarily for orchard, vineyard and horticultural work.

The CAT4 cab provides maximum protection against operator contamination when the Rex 4 tractors are used with a sprayer.

There are two filter housings, one in each side of the cab roof panel, an airflow diverter inside the air intake assembly located at the back of the roof panel, and filter status information on the tractor’s instrument display.

With a general-purpose filter in one side and a carbon filter in the other, operators can switch between the two as appropriate, with the cab pressurised to the level required to prevent ingress of contaminants through door seals, and so on.

“This filter arrangement is clearly more convenient than having to physically change one filter for another – and that convenience means operators are more likely to take advantage of the higher-level protection provided by carbon filtration.

“Also, with a single element filtration system, once the carbon filter has been inserted ready for spraying, it will likely stay there when the tractor is used for non-spraying work and continue to degrade,” he points out.

With the Landini system, the carbon filter need only be ‘active’ when required, simply by flicking a switch in the cab. The operator can then see the carbon filter’s status, as well as the airflow speed and cab pressure, on the tractor’s instrument panel.


There are no comments on this article.

Leave a Comment

You must be logged in to make a comment. Login Now
Opinion Poll

We're not running a poll right now. Check back soon!